產品規格<\/span> <\/span><\/b> <\/p> <\/td>

CG-100SRII<\/span><\/b> <\/p> <\/td>

CG-130SRII<\/span><\/b> <\/p> <\/td> <\/tr>

可安裝片材寬度<\/span><\/span><\/b> <\/p> <\/td>

90<\/span>～<\/span>1250mm<\/span> <\/p> <\/td>

90<\/span>～<\/span>1550mm<\/span> <\/p> <\/td> <\/tr>

可切割范圍<\/span>(※1)<\/span><\/b> <\/p> <\/td>

1070mm<\/span> <\/p> <\/td>

1370mm<\/span> <\/p> <\/td> <\/tr>

最大速度<\/span><\/span><\/b> <\/p> <\/td>

85cm/s<\/span>（筆升起，<\/span>45°<\/span>方向）<\/span> <\/p> <\/td> <\/tr>

可設定速度<\/span><\/span><\/b> <\/p> <\/td>

1<\/span>～<\/span>10cm/s<\/span>（每級<\/span>1cm/s<\/span>）、<\/span>10<\/span>～<\/span>60cm/s<\/span>（每級<\/span>5cm/s<\/span>）<\/span> <\/p> <\/td> <\/tr>

重復精度<\/span><\/span><\/b> <\/p> <\/td>

0.2mm/2m<\/span>（薄膜受溫度影響產生伸縮時除外）<\/span> <\/p> <\/td> <\/tr>

精度保證范圍（重復精度）<\/span><\/span><\/b> <\/p> <\/td>

1050mm×2m<\/span> <\/p> <\/td>

1350mm×2m<\/span> <\/p> <\/td> <\/tr>

最大壓力<\/span><\/span><\/b> <\/p> <\/td>

400g<\/span> <\/p> <\/td> <\/tr>

設定壓力<\/span><\/span><\/b> <\/p> <\/td>

刀片<\/span><\/span><\/b> <\/p> <\/td>

10<\/span>～<\/span>20g(<\/span>每級<\/span>2g)<\/span>、<\/span>20<\/span>～<\/span>100g(<\/span>每級<\/span>5g)<\/span>、<\/span>100<\/span>～<\/span>400g(<\/span>每級<\/span>10g)<\/span> <\/p> <\/td> <\/tr>

筆<\/span><\/span><\/b> <\/p> <\/td>

10<\/span>～<\/span>20g(<\/span>每級<\/span>2g)<\/span>、<\/span>20<\/span>～<\/span>100g(<\/span>每級<\/span>5g)<\/span>、<\/span>100<\/span>～<\/span>150g(<\/span>每級<\/span>10g)<\/span> <\/p> <\/td> <\/tr>

可切割薄片<\/span><\/span><\/b> <\/p> <\/td>

厚度<\/span>0.25mm<\/span>以下的不退色薄片：聚氯乙烯薄片、熒光薄片、反射薄片（<\/span>※2<\/span>）<\/span> <\/p> <\/td> <\/tr>

可使用的筆<\/span><\/span><\/b> <\/p> <\/td>

刀片、市售圓珠筆（<\/span>※3<\/span>）<\/span> <\/p> <\/td> <\/tr>

命令<\/span><\/span><\/b> <\/p> <\/td>

MGL-IIc/Ic1<\/span> <\/p> <\/td> <\/tr>

接口<\/span><\/span><\/b> <\/p> <\/td>

USB<\/span>、<\/span>RS-232C<\/span> <\/p> <\/td> <\/tr>

接受緩沖容量<\/span><\/span><\/b> <\/p> <\/td>

30MB<\/span> <\/p> <\/td> <\/tr>

運行環境<\/span><\/span><\/b> <\/p> <\/td>

可使用溫度：<\/span>5℃<\/span>～<\/span>35℃<\/span>，濕度：<\/span>35<\/span>～<\/span>75<\/span>％<\/span>Rh<\/span>（無凝結）<\/span> <\/p> <\/td> <\/tr>

電源<\/span><\/span><\/b> <\/p> <\/td>

AC100V<\/span>～<\/span>240V<\/span>、<\/span>120VA<\/span>以下<\/span> <\/p> <\/td> <\/tr>

外形尺寸（長<\/span>×<\/span><\/b>寬<\/span>×<\/span><\/b>高）<\/span><\/span><\/b> <\/p> <\/td>

1435×580×1125mm<\/span> <\/p> <\/td>

1735×580×1125mm<\/span> <\/p> <\/td> <\/tr>

重量<\/span><\/span><\/b> <\/p> <\/td>

38kg<\/span> <\/p> <\/td>

44kg<\/span> <\/p> <\/td> <\/tr> <\/tbody> <\/table>

※1<\/span> <\/p>

根據使用軟件的不同，最大進給長度有時會受限制。<\/span> <\/p>

※2<\/span> <\/p>

使用熒光薄片專用刀片（<\/span>SPB-0007<\/span>）、反射薄片專用刀片（<\/span>SPB-0006<\/span>）時。<\/span> <\/p>

※3<\/span> <\/p>

市售圓珠筆為直徑<\/span>8mm<\/span>～<\/span>9mm<\/span>的筆，請使用夾持部分沒有突起的筆。<\/span>
<\/span>筆尖位置有差異。<\/span> <\/p>

<\/span><\/b> <\/p>

<\/span><\/b> <\/p>

連續讀取裁切標記功能<\/span><\/b><\/span><\/b> <\/p>

<\/span>用噴墨打印機輸出標有裁切標記的拼版數據。自動地連續讀取該板材的裁切標記，一邊對其逐個進行自動修正，一邊連續正確地切割出復雜形狀。憑借**讀取<\/span>4<\/span>個裁切標記，使打印時或覆膜時的變形也能得到修正，從而實現高精度切割。<\/span> <\/p>

<\/span>對于<\/span>X<\/span>軸和<\/span>Y<\/span>軸方向上連續布置的拼版數據，也能夠自動對每一組分別進行修正和切割，來實現高精度的切割。<\/span> <\/p>

<\/span> <\/p>

**虛線切割，效果別具一格<\/span><\/b><\/span><\/b> <\/p>

<\/span>憑借**的虛線切割，可以切透介質。制作出的產品只留下很少的連接部分與介質連接在一起，所以使現場作業變得更加容易。當然，如有必要，用手即可輕松將其分離。<\/span>
Mimaki<\/span>獨自開發的技術。<\/span> <\/p>

<\/span> <\/p>

<\/span> <\/p>

能夠防止切割殘留的重疊切割功能<\/span><\/b><\/span><\/b> <\/p>

通過任意重疊切割起點和終點，無論是厚的介質還是有粘性的難切割介質，都可以實現毫無切割殘留的精美作品。<\/span> <\/p>

<\/span> <\/p>

標準配備<\/span><\/b>2<\/span><\/b>種切割軟件<\/span><\/b><\/span><\/b> <\/p>

**的插入式切割軟件揊<\/span>ine Cut8”<\/span><\/b> <\/p>

支持<\/span>Illustrator CS5_<\/span>的嵌入式切割軟件。可以滿足輪廓切割、根據圖片制作切割數據、利用分割拼圖功能對長材料進行分塊切割等**切割需求。<\/span> <\/p>

操作簡單的入門切割軟件<\/span>“Simple Cut”<\/span><\/b> <\/p>

這是一種即使沒有<\/span>Illustrator<\/span>等軟件的操作經驗**操作切割繪圖機的操作者也可以簡單使用的切割軟件。設定在一般的辦公室中使用、擁有簡單且便利的功能：<\/span>
●<\/span>從<\/span>MS-Word<\/span>獲取數據。<\/span>
●<\/span>將掃描儀數據變換成輪廓圖。<\/span>
●<\/span>收錄了專用字體及各種符號（剪貼畫）。<\/span> <\/p> <\/div>