功  <\/span><\/span>能  <\/span><\/span>說  <\/span><\/span>明<\/span><\/span> <\/p>

該測試機使用在對觸摸屏進行寫和敲擊壽命測試，該機采用數控的機械結構帶動配重的砝碼產生標準恒定的壓力，對產品仿真進行寫壽命測試，使用者可通過遞加的寫次數用萬用表測得阻值進行分析，該分析可得出被測產品的變化曲線、特變、壽命次數，亦可將測試頭改用中華HB<\/span>的鉛筆對產品的外殼進行硬度測試，測試項目有膠硬度測試、表面噴漆硬度測試、噴漆附著力測試。該機設雙頭壓力可配選、速度可調、行程可調、停止數可設等功能是貴公司測試部門的“良”機。<\/span><\/span> <\/p>

一、安裝<\/span><\/span> <\/p>

1.    <\/span>拆裝：小心拆開包裝，確認對象齊備，如有錯漏，請直接與供貨商聯系。<\/span><\/span> <\/p>

2      <\/span>安裝前注意事項：<\/span><\/span> <\/p>

a      <\/span>觸摸屏劃線壽命測試機必須安置于水平面上。<\/span><\/span> <\/p>

b      <\/span>觸摸屏劃線壽命測試機四周必須保留一定的空間。<\/span><\/span> <\/p>

c      <\/span>組裝及連接：<\/span><\/span> <\/p>

d      <\/span>電源線：將電源線插入接有220<\/span>伏特、3A<\/span>以及可靠接地的三腳插座上。<\/span><\/span> <\/p>

 <\/span><\/span> <\/p>

二、設定劃線范圍<\/span><\/span> <\/p>

按照屏幕上的顯示功能，按下觸摸功能鍵區的功能鍵，進入主畫面進入各項的設定即可，非常方便！<\/span><\/span> <\/p>

1<\/span>、手動畫面：用手可以模擬機器的運行及測量要測屏幕的尺寸<\/span><\/span> <\/p>

2<\/span>、測試畫面： 進行測試時的畫面觀察<\/span><\/span> <\/p>

3<\/span>、設置畫面：進行屏的速度、<\/span><\/span> <\/p>

4<\/span>、監控畫面：當機器故障或有報警時，會在此畫面顯示<\/span><\/span> <\/p>

三、技術指標：<\/span><\/span> <\/p>

1.      <\/span>工作臺尺寸：600mm<\/span>×300mm<\/span><\/span><\/span> <\/p>

2.      <\/span>行程范圍：10mm<\/span>-150mm<\/span>（采用輸入設定往復距離）<\/span><\/span> <\/p>

3.      <\/span>測試動力：步進馬達<\/span><\/span> <\/p>

4.      <\/span>測試頭：標準測試筆<\/span><\/span> <\/p>

5.      <\/span>運動方式：步進電機驅動往復<\/span><\/span> <\/p>

6.      <\/span>測試速度范圍：0-200mm/<\/span>秒（視要求而定）<\/span><\/span> <\/p>

7.      <\/span>壓力：250g<\/span>可配重（砝碼）<\/span><\/span> <\/p>

8.      <\/span>記數6<\/span>位，掉電記憶<\/span><\/span> <\/p><\/div>