RUGGEDCOM ROS® version 5.2.0 software is now available for the RUGGEDCOM products listed below. It can be obtained by requesting support at https://support.industry.siemens.com/my/us/en/requests#createRequest.

The following RUGGEDCOM RS series switches and devices are supported:

• RUGGEDCOM RST2228
• RUGGEDCOM RSG907R
• RUGGEDCOM RSG909R
• RUGGEDCOM RSL910
• RUGGEDCOM RSG920P
• RUGGEDCOM RSG2488
• RUGGEDCOM RMC8388
• RUGGEDCOM RSG2300
• RUGGEDCOM RSG2288
• RUGGEDCOM RS900 (32M)
• RUGGEDCOM RS900G (32M)
• RUGGEDCOM RSG2100 (32M)
• RUGGEDCOM RS416

New Features and Enhancements

• IPv6 Management
  ROS devices can be managed using the IPv6 protocol. Please see the device specific user guides for supported IPv6 services.
• Media Redundancy Protocol (MRP) According to IEC 62439-2
  MRP specifies a uniform method of achieving media redundancy with deterministic recovery time in case of a single network failure (link failure, switch node failure, causing link failures). ROS 5.2.0 supports Media Redundancy Manager (MRM), Media Redundancy Automanager (MRA), and Media Redundancy Client (MRC) functionalities.
• IEC61850 Bridge Object Model
  A management and monitoring protocol for the Electric Power industry. This protocol consists of MMS (Manufacturing message Specification) as a transport mechanism, while the object model defines the objects to be polled or configured. Unbuffered reports are supported.
  A new set of commands were added to change usernames and passwords over an SSH connection.
• Added MIBs for IEC 62439-3 (HSR/PRP)

General Improvements

• Generic SNMP Traps are Replaced by Specific SNMP Traps
  Ruggedcom devices generate specific traps for alarms to improve NMS management of device events, information collections, and triggering warnings without parsing the description string.
• Added VDSL SNR Threshold Parameter for RUGGEDCOM RSL910
  The new parameter allows users to set the SNR Threshold at which a VDSL connection will be established.
•  VDSL Improvements for RUGGEDCOM RSL910
  In some circumstances, the VDSL port needs to be manually reset in order to establish a VDSL link. This issue has been resolved.

Security Improvements

 This version contains security-relevant product improvements which increases the robustness.  Upgrading to this version is recommended.

• RCDP State Management
  The RCDP state machine was changed to enhance overall security by reducing the attack surface. Please see the associated device’s User Guide for details.
  

Resolved Issues

• SysDesc in MIB2 for Compatibility with SINEMA Server
  SysDesc output now has more descriptive information to ensure compatibility to SINEMA Server.
• Weak Password Alarm is set After Restoring Factory Defaults
  After applying factory defaults (and resetting the admin, operator and guest passwords to their default values) the Weak Password Alarm was not triggered. This issue has been resolved.
•  “sslkeygen” Command Execution with Incorrect Parameters Causes a Device Reboot
  Executing the sslkeygen command with some invalid parameters will cause the device to reboot. This issue has been resolved.

產品描述

Enlarge

SIMATIC IPC547eco 是一款堅固耐用，性能可靠的產品，具有19英寸標準4U機架式設計，采用英特爾奔騰雙核 E5300處理器，最多可達 500 GB 的串行 ATA 硬盤配置。可在環境溫度高達40°C的工業條件下24 小時不間斷使用德國西門子全新611軸卡控制板6SN1118-0DJ23-0AA2正品現貨。借助于 PCI/PCI-Express 技術的 7 個長擴展槽，該設備可以使用功能強大的擴展卡，例如，PCIe × 16（2代） 圖形卡可用于連接兩臺顯示器，而 PCIe × 8（1 槽）可用于安裝幀采集器模塊等。SIMATIC IPC547eco共有四種固定配置，使選型變得更加簡單、快捷，非常貼合中國客戶需求�？蓱�(yīng)用于：

• 對工業過程進行測量，以及開環和閉環控制

• 生產過程可視化

• 圖像處理，比如在質量檢驗中的應用

• 數據采集和管理，比如用于配方管理

• 智能能源管理

To the top of the page